 | |  | | | DELTA 17-950L 16.5-Inch TwinLaser Crosshair Drill Press | | | | | SKU:
28652 | | Availability:
Out of stock | | | | | | Thanks to its adjustable Twin Laser pod that projects a bright laser cross hair on your work piece to indicate the point of bit contact, the DELTA 17-950L 16.5-inch Twin Laser Crosshair Drill Press lets you drill more accurately than ever before . You'll never have an inaccurate hole placement again. The large 14 x 18-inch cast iron table includes T-slots, a removable insert, and has the capacity to tilt up to 45 degrees forward so you can make angular drills. A flexible light is integrated to keep your workspace illuminated, and the table can be raised and lowered to your comfort level via a rack and pinion system. The drill press uses a 5/8-inch chuck, and offers a 3-7/8-inch quill stroke. The drill features a 1/2 HP induction motor with 12 speeds ranging from 250 to 3000 RPM, making it suitable for a variety of materials such as wood, metal, and plastic. | | | |
List Price:
| | |
You Save:
| | |
*Shipping:
| |
| | |
|
| | Product Details | | Package Length: | 56.0 inches | | Package Width: | 22.5 inches | | Package Height: | 10.7 inches | | Package Weight: | 207.0 pounds | | Average Customer Rating: |  based on 37 reviews |
|  |
| | Features | Flexible lamp provides extra light to the work surfaceAdjustable-position, locking depth stop for accurate depth measurement and repetitive drillingBright laser crosshairs clearly indicate the drill point9v battery needed for crosshair lasers (battery not included)14-inch by 18-inch woodworker-friendly table
| |
| | Customer Reviews | Average Customer Review: ( 37 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
59 of 59 found the following review helpful:
Delta 17-950L Drill Press Feb 22, 2007
By David Wambolt
"dmw"
I recently received the Delta 17-950L drill press and for the price after the current Amazon promotion, it's hard to beat. It is a well built machine that arrived in 1 business day via Eagle Global Logistics. I had no problems really assembling the unit on my own. The top is a little heavy, but I got it.
Positives:
- Smooth running with little vibration. It's not glass smooth, but it certainly is not rough. It runs just fine at 3000rpm
- Runout is very good, thanks to the larger 2" quill
- The table is finished nicely and is large. I installed a 68 pound Palmgren 6" cross sliding vise (take my advice and get a 4" for this size drill press) and the table assembly holds it fine. It makes it a bit more difficult to raise the table, but it's much better than I thought it would be.
- Assembly was easy and all of the parts were there.
- Laser assembly is very easy to adjust and aim.
- Allen wrenches and chuck removal tool are all included. All you need is a metric socket set or wrenches to assemble.
- Power seems to be good and I did not bog the unit down doing some wood and metal boring.
- Quill lock in the down position for using sanding drums, etc.
Negatives:
- Depth stop adjustment is on the spoked handle and doesn't exactly come across as high quality
- A little bit of vibration, but nothing out of the ordinary really.
- 3-7/8" quill stroke is a little on the shallow side, but still better than a lot of the drill presses out there.
Overall this is a nice drill press. I still have a 20-959LX on order which is Delta's new and yet to be released 20" variable speed drill press with digital readouts. This drill press is basically 1/3rd of the cost of that machine, but I don't feel it can only do 1/3rd of the jobs. I'm sure that this machine will last many years. The laser works great and is very handy. The table is nice and while this is one the lower end drill presses in Delta's lineup, it runs great, drills great, and comes across as a quality piece of equipment. I have no doubt there are nicer drill presses out there, but for the price this one deserves a look.
31 of 32 found the following review helpful:
 Great Drill Press... Jan 09, 2007
By Mike M
I looked at a lot of drill presses before buying this one, both free-standing and benchtop, and I am so glad that I bought this one. Sure it's big and heavy, but that is a good thing here... This thing will handle anything that I throw at it.
Some of the highlights for me are:
-It adjusts easily and is solid
-The work surface is huge and has lots of options for clamping material to it.
-The laser guides were easy to adjust and really work well
-The included light is a real plus
I bought the Delta 17-924 Mortising Attachment kit, even though it doesn't list this drill as being compatible, but I was told by someone that it would work with it. Well it does and doesn't work with it... The chisel holding attachment actually fits very well, not needing any of the spacers provided. However, the fence will not attach to the work surface as supplied, unless you are drilling into a 6 inch wide piece of stock. It is designed for different work surfaces that have slots in them that come closer to the center of the surface, while this drill has the large wooden insert. So, what I did was to attach the fence to another work surface and used the attaching hardware supplied to slide this new surface in and out using the T tracks. After doing this I have been able to make the mortises just great, which I think would be difficult with a smaller drill press due to the force required.
I am definitely glad that I bought this one and I would highly recommend it to others...
25 of 25 found the following review helpful:
Nice unit, questionable packaging Jan 01, 2007
By The Engineer
"DIY expert"
The drill press and laser work great, smooth and easy enough to change speeds, etc.
The shipping package was beat to heck (torn and buckled). Some minor damage to take up with the shipper, but everything works fine. I had to replace a few small parts due to damage (shipper paid for them), and found that the Delta Supply on the web has all the parts and quick service.
I got mine from Amazon, but check local Lowes prices for latest deals.
The "woodworkers" table works well. The T-slots are handy for fixturing or mounting guides. The quill stop is the dial on the right side, and works fine. The whole unit runs smooth. If only they would have incorporated the light wiring into the unit instead of adding another cord to plug in.
The laser works good and is handy for instant centering. Make sure your adjust it per the directions.
Tilting the table is awkward, but I never had to tilt one before. I always had a vise to adjust.
I began using a digital angle reader (like Wixie) to set the table. It makes angles easy to set. Also, if you use a drum sander in this drill press, the removable table insert allows you (when it is removed) to adjust the height of the sanding drum to utilize different areas (like an oscillating sander would do, but without the automatic movement). Just sand a while at the bottom of the drum, then raise the table and sand at the top of the drum. Handy feature.
18 of 18 found the following review helpful:
A solid upgrade Nov 28, 2007
By Dusty
A solid upgrade from my Delta 011-090 Drill Press
The table adjustment crank could be smoother, it tends to jump a little, but is a vast improvement over there not being a crank
The table leveling could be better, I used a digital angle gauge to adjust to zero tighter then the Delta procedure called for.
The manual is clearer then many recent Delta manuals (like the 31-255X)
The laser centering is nice, but certainly not a requirement, it's a little gimmicky.
16 of 16 found the following review helpful:
Good Drill Press For The Money Nov 17, 2008
By F. Greenwood
I have had this machine for about a year now. I bought it after thoroughly researching models in this price range +/- 50%. This press has proven itself to be accurate and versatile. As others have pointed out, there is virtually no runout. Build quality is good, but not perfect. (For example, there was a rattle to quiet.) It has plenty of travel (just under 4") for the wide range of tasks I have given it, and ample power, even for large hole saws. The large rectangular table is a pleasure to use and was fairly easy to calibrate to level. The T-tracks are super handy. The laser is nice in some cases, but not necessary.
I immediately added a shop-built fence, a light bulb (it does not come with one), about an inch of foam weather stripping under top lid to quiet the rattle, and a couple of zip ties to better route the cords. I also mounted the whole unit on a mobile base made of 1.5" square oak and a double layer of 3/4" plywood. After these, it is just about perfect, and certainly, I believe, the best value in this price range.
It is helpful to have a helper for assembly, as the heavy head has to be lifted onto the top of the column once the column is vertical. If you want a mobile base, it is much easier to mount it while you are assembling the unit rather than later. Two layers of plywood were necessary for the base to reduce flex.
See all 37 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
