-->
Milwaukee 4094 Diamond Coring Motor 450/900 RPM, 20 Amp with Shear Pin
Milwaukee 4094 Diamond Coring Motor 450/900 RPM, 20 Amp with Shear Pin

Milwaukee 4094 Diamond Coring Motor 450/900 RPM, 20 Amp with Shear Pin

0 Review(s) Write a Review
Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 rpm or 900 rpm operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit.
Part Number: Milwaukee-4094
Buy from amazon
Buy from toolbarn
Buy from International Tools
Buy from eBay
Milwaukee 4094 Diamond Coring Motor 450/900 RPM, 20 Amp with Shear Pin

Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 rpm or 900 rpm operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2 in. to 10 in. in diameter.

Includes:

  • (1) Diamond Coring Motor 450/900 RPM, 20 Amp with Shear Pin (4094)
  • (1) Built-In Water Swivel
  • (1) Water Control Valve
  • (6) Extra Shear Pins
  • (1) Open End Wrench
  • (1) Water Hose Adapter
Key Features:
  • Two speeds: 450 and 900 rpm
  • 20 amp motor
  • Shear pin protection protects gears and motor
  • Built-in water swivel
TOP