-->
Milwaukee 6890 16 Gauge Nibbler
Milwaukee 6890 16 Gauge Nibbler

Milwaukee 6890 16 Gauge Nibbler

0 Review(s) Write a Review
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal.
Part Number: Milwaukee-6890
Buy from amazon
Buy from toolbarn
Buy from International Tools
Buy from eBay
Milwaukee 6890 16 Gauge Nibbler

A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge steel and 18 gauge stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.

Includes:

  • (1) 16 Gauge Nibbler (6890)
  • (1) Allen Wrench
  • (1) Plate Wrench

Key Features

  • 3.8 amp, 1,900 spm
  • Cuts up to 7 ft. per minute
  • 0.87 in. starting hole required
  • AC-DC paddle switch
TOP